TPM-60 is a complete kit for many cruisers with wire wheels - tubed or tubeless - with short vertical valve-stems.
■ (1) Valve-Cap style Elongated Wheel Sensor
■ (1) Valve-Cap style regular Wheel Sensor
■ (1) Display - handlebar mounted or flush mounted
■ (2) Transceivers - mounted facing the wheel
TPM-60 Wheel Sensors screw-on your existing valve-stems of the wheel, like a valve cap. Typically the elongated Wheel Sensor mounts on the rear wheel, which is wider. They have a horizontal fill-port for easier fill. Machined from aircraft grade 6061 T6 aluminum and weigh only 0.50 to 0.65 Oz (14.2 to 17.1 Grams).
The backlit LCD display is ultrasonic welded for waterproofing. The size is 2.00” x 2.45” x 0.50” ( 51mm x 61mm x 13mm). Handlebar mounting cradle is also included.
■ Adjustable backlight intensity.
■ Multicolor backlight for warning.
■ Detachable faceplate.
■ High tactile buttons.
Transceiver electronics, clamp-base and USOC cable are over-molded in polyurethane for durability. They are 2.10” x 0.75” (53.3mm x 19mm) and weigh 6.5 Oz (185 Grams).
Select appropriate mounting kit available for your bike.
Built-in systemOne software implementation, so that after entering the wheel diameter and fully loaded weight of the bike, you can see real-time performance data.
■ Speed in MPH or KPH
■ Rolling HP at the rear wheel
■ 0 to 60 MPH times - automatic capture & update
■ Max HP capture during the ride - background capture & update
Real time monitoring of tire pressures and the performance of the bike as you ride.
Click here for Installation Manual