VL-20 vectraLIGHT LED arrays are designed to be mounted on the bottom edge of the mirrors of most bikes. They are flexible so that they can bend somewhat to match contour of the mirror. The unit attaches to the mirrors with an extremely durable two-sided tape.
Instead of replacing the entire mirror assembly, these arrays are easy to mount and provide additional functions:
- Front facing 5 LED array in amber
- Rear Facing 5 LED array in Red
- Brake override for the rear facing LEDs
Each LED array is totally waterproof and has a 6' (1.8m) long black USOC cable with an RJ-11 plug. There are (2) breakout sockets with inputs for: power, ground, turn signals and brakes. The connections are made using the automotive grade Scotchlok brand of IDC taps, so none of the wiring on the bike has to be cut.
The software for the VL-20 version does not allow programmable running light intensity.
vectraLIGHTs operate as a reduced intensity running lights, both amber LEDs in the front and red LEDs in the back operate SEQUENTIALLY as turn signals, and as brake lights the rear facing red LEDs come on at full brightness.
The side view mirrors are the widest points of the bike. Mirror mount location makes your bike look wider and much more conspicuous.
vectraLIGHT uses a microprocessor to time the sequencing of the super bright LEDs. Made of AlGaIdP material, amber LEDs have a minimum output of 5,000 mCd, and the red LEDs have a minimum output of 8,000 mCd. The half angle of the LEDs is 30 degrees for wide viewing cone.
Click here for Installation Manual
You may also be interested in the following product(s)