TPM-40 is a complete kit for motorcycles that have a valve-stem in hollow wheel spokes.
■ (1) Valve-Cap style Wheel Sensor without fillport for hollow spoke wheel
■ (1) Screw-on valve-Cap style Wheel Sensor with fillport for short valve stems
■ (1) Display - handlebar mounted or flush mounted
■ (2) Transceivers - mounted facing the wheel
TPM-40 Wheel Sensors are screw-on valve cap type. One does not have a fill-port, so adding or removing air requires removal of the sensor. And the other does have a fill-port. Machined from aircraft grade 6061 T6 aluminum and weigh only 0.25 Oz (7.1 Grams).
The backlit LCD display is ultrasonic welded for waterproofing. The size is 2.00” x 2.45” x 0.50” ( 51mm x 61mm x 13mm). Handlebar mounting cradle is also included.
■ Adjustable backlight intensity.
■ Multicolor backlight for warning.
■ Detachable faceplate.
■ High tactile buttons.
Transceiver electronics, clamp-base and USOC cable are over-molded in polyurethane for durability. They are 2.10” x 0.75” (53.3mm x 19mm) and weigh 6.5 Oz (185 Grams).
Select appropriate mounting kit available for your bike.
Built-in systemOne software implementation, so that after entering the wheel diameter and fully loaded weight of the bike, you can see real-time performance data.
■ Speed in MPH or KPH
■ Rolling HP at the rear wheel
■ 0 to 60 MPH times - automatic capture & update
■ Max HP capture during the ride - background capture & update
Real time monitoring of tire pressures and the performance of the bike as you ride.
Click here for Installation Manual