- Most Ninja models with LED brakes lights
- Plug-in installation with matching 3-pin plugs
- 4-sec deceleration flash pattern
- Mounts in the tail section
- 100HD-KN3 unit is designed for many Ninja LED tail lights with 3-pin plug as shown.
- 100HD-KN3 is totally plug-n-play.
- 100HD-KN3 fits in the tail section or under the seat.
As shown here, the 3-pin plug of the tail light on most Kawasaki Ninja models comes out as a pig-tail.
Once you locate it, all that's required is to unplug it and insert the matching plugs of the 100HD-KN3 tailBlazer.
Motorcycle Safety Foundation (MSF) suggests that you pump your brakes at each stop. tailBlazer does it automatically, and by flashing the tail light at maximum brightness.
When you apply the brakes the brake light will modulate rapidly at first then slow down to a solid ON over a period of (4) seconds.
WHAT DO THEY SEE?
As soon as you tap your brakes, drivers behind you will see a rapid flash of the brake lights. This sudden flashing commands immediate attention of vehicles behind you.
WHAT WILL THEY THINK?
tailBlazer uses a flash pattern which decays exponentially - a well-recognized deceleration warning. The attention to the initial flashing now changes to a clear recognition that you're beginning to slow down!
Simply flashing brake lights or flashing them on & off will get the attention of drivers behind you, but it doesn't invoke anything else. Every split second of delay in their reaction reduces your safety margin.
The internal circuitry is controlled by a microprocessor, which allows precise flash patterns, overload detection and reverse polarity protection.
Installation videos with standard bulbs and LED bulbs are viewable on our YouTube channel. Or you can search for them directly on YouTube.